Damp Proofing in Lutterworth
Extensions including garage conversions will typically require supplementary damp proofing to be installed through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not built to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will often be performed by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may have to be improved as part of the conversion in order to meet current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This can be carried out by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, and so is it necessary to make sure that your garage conversion employs suitable damp proofing methods.