Damp Proofing in Ellesmere Port
Extensions such as garage conversions will usually require supplementary damp proofing to be added during the conversion, as the existing garage typically has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may need to be improved as part of the conversion in order to meet current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This can be accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, and so is it important to make sure that your garage conversion employs suitable damp proofing methods.