Damp Proofing in Ormskirk
Extensions such as garage conversions will usually require extra damp proofing to be added as part of conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Moreover, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be performed by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might need to be updated as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it necessary to ensure that your garage conversion incorporates suitable damp proofing methods.