Damp Proofing in Alderley Edge
Extensions including garage conversions will typically require extra damp proofing to be added during the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be performed by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might need to be updated as part of the conversion in order to meet current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should adhere to, and so is it necessary to make sure that your garage conversion employs appropriate damp proofing methods.