Damp Proofing in Congleton
Extensions including garage conversions will usually require supplementary damp proofing to be installed as part of conversion, as the existing garage will typically have a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might need to be updated as part of the conversion in order to adhere to current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This is accomplished by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, and so is it necessary to make sure that your garage conversion makes use of suitable damp proofing methods.