Damp Proofing in Holywell
Extensions such as garage conversions will usually require additional damp proofing to be added through the conversion, as the existing garage typically has a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Moreover, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by employing a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this may have to be updated as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to make sure that your garage conversion employs appropriate damp proofing methods.