Damp Proofing in Bala
Extensions such as garage conversions will typically require supplementary damp proofing to be added through the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by utilising a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this might need to be improved as part of the conversion to be able to meet current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is done by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, therefore is it vital to make sure that your garage conversion makes use of suitable damp proofing methods.