Damp Proofing in Welshpool
Extensions including garage conversions will usually require supplementary damp proofing to be installed during the conversion, as the existing garage typically has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be improved as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it important to ensure that your garage conversion makes use of appropriate damp proofing methods.