Damp Proofing in Llanidloes
Extensions such as garage conversions will often require supplementary damp proofing to be added as part of conversion, as the existing garage will typically have a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may have to be improved as part of the conversion to be able to meet current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is done by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, and so is it important to make sure that your garage conversion employs suitable damp proofing methods.