Damp Proofing in Borth
Extensions such as garage conversions will usually require additional damp proofing to be added through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will often be achieved by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be improved as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This is performed by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to adhere to, therefore is it necessary to make sure that your garage conversion employs suitable damp proofing methods.