Damp Proofing in Bucknell
Extensions including garage conversions will typically require supplementary damp proofing to be added during the conversion, as the existing garage routinely has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will often be achieved by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be improved as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it important to make sure that your garage conversion makes use of appropriate damp proofing methods.