Damp Proofing in Ruthin
Extensions including garage conversions will usually require supplementary damp proofing to be added through the conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be done by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, therefore is it necessary to make sure that your garage conversion incorporates appropriate damp proofing methods.