Damp Proofing in Penmaenmawr
Extensions such as garage conversions will often require additional damp proofing to be added as part of conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. Additionally, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, and so is it important to make sure that your garage conversion employs appropriate damp proofing methods.