Damp Proofing in Dagenham
Extensions including garage conversions will usually require additional damp proofing to be installed through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be performed by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this may need to be updated as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is carried out by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, and so is it vital to make sure that your garage conversion incorporates suitable damp proofing methods.
