Damp Proofing in Bedfordshire
Extensions including garage conversions will usually require extra damp proofing to be installed as part of conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may have to be improved as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be done by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, and so is it vital to ensure that your garage conversion incorporates suitable damp proofing methods.