Damp Proofing in Thornton-cleveleys
Extensions such as garage conversions will usually require supplementary damp proofing to be installed as part of conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this may need to be improved as part of the conversion in order to adhere to current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is done by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to adhere to, and so is it vital to ensure that your garage conversion makes use of suitable damp proofing methods.