Damp Proofing in Newton Stewart
Extensions including garage conversions will typically require extra damp proofing to be added during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not built to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will often be achieved by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might have to be improved as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This can be accomplished by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it vital to ensure that your garage conversion incorporates suitable damp proofing methods.