Damp Proofing in Morden
Extensions such as garage conversions will usually require supplementary damp proofing to be added through the conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Additionally, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will usually be performed by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This can be done by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, and so is it necessary to make sure that your garage conversion makes use of appropriate damp proofing methods.
