Damp Proofing in Hamilton
Extensions including garage conversions will usually require supplementary damp proofing to be added through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will often be performed by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this might have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This is performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should adhere to, and so is it necessary to make sure that your garage conversion makes use of suitable damp proofing methods.
