Damp Proofing in Blackpool
Extensions such as garage conversions will often require extra damp proofing to be installed during the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might have to be updated as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This can be carried out by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it necessary to ensure that your garage conversion makes use of suitable damp proofing methods.