How to make steps for a deck?

Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to: Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm Add a central step riser to stairs wider than 900mm to prevent them buckling Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth Getting started To build your steps for the deck, you’ll need: Step treads (the actual step themselves) Step risers Coach screws Deck screws Saw Drill Make the steps for your deck Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws. After drilling pilot holes, screw the treads into the risers at each end with deck screws. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.

Wooden Decking in Yarm

Compare Wooden Decking Prices in Yarm

Wooden Decking in Yarm

Wooden decking is an increasingly prevalent option for providing outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very beautiful areas that can be used year round by installing outside heating and light. Wooden decking is typically fitted in locations in front of patio or French doors where they can create a smooth transition between inside and outside spaces. Wooden decking is available in virtually any size or shape to fit any area. Curved designs or large areas joined by pathways can create a stunning effect. Wooden decking is fairly easy to install and causes minimal disruption, particularly in comparison to alternate options like patio or paving. It can even be installed over the top of a pre-existing patio. It is vital however to be certain that your wooden decking is structurally sound and able to take the weight of any furniture or plants that you would like to use on the decking. There is a selection of species of wood that can be used in wooden decking. Typically decking is made of hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will need maintenance, which typically requires yearly cleaning and staining for weather proofing, composite woods have become more popular for use in wooden decking because they are more robust and require far less maintenance.

Average Wooden decking cost in Yarm

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2024

Avg. price low	Avg. price low £1,125
Avg. price	Avg. price £1,500
Avg. price high	Avg. price high £1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Yarm, as reported by local LeadsDoWork members.

Wooden decking installation cost in Yarm 2024

	Labour cost	£1,050
	Material cost	£375
	Waste removal	£75

Time frame: 1-4 days

Wooden decking searches in November 2024

Choose your search type

No. of estimated projects Estimates by cities and towns

Wooden decking Projects in Yarm in October 2024

225

Requests for quotations in Yarm in October 2024

0

Requests for Wooden decking quotations in Yarm in October 2024. 0% change from September 2024.

0

Requests for Wooden decking quotations in North Yorkshire in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Yarm October 2024

Wooden decking near you

Choose locations

Towns and Cities near Yarm Other locations within Yorkshire & Humber

Yarm

Yarm is a town in North Yorkshire, England. The community gets on the south financial institution of the River Tees and is traditionally part of the North Riding of Yorkshire. The bridge at Yarm marked the outermost reach of tidal flow up the River Tees up until the opening, in 1995, of the Tees Barrage, which now controls river flow above Stockton. As the last bridge on the river prior to the sea, it was superseded by a brand-new toll bridge opened in Stockton in 1771. The oldest part of the community, around the High Street, is positioned in a loop of the river, and the more recent parts of the community include the factor where the River Leven fulfills the River Tees. The community is governed as part of the Borough of Stockton-on-Tees.

Looking for Wooden decking in Yarm?

Get free quotes from local carpenters

Get free quotes

How it works

Tell us about your Wooden decking project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Carpenters in Yarm

Get free, no-obligation quotes from 4 verified Carpenters working in Yarm.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

Usually, slipperiness is caused by algae or dirt on top of the deck or terrace. A full cleaning treatment should restore the natural grip of the wood or stone. If slipperiness is a persistent problem, consider installing grip mats in high traffic areas of the deck.

Yes, although you should make sure that the terrace or decking is able to support the weight of a hot tub. Usually, you will need to have a structural survey carried out on the area. Seek the advise of a hot tub retailer or installer about the logistics of installing one at your property.

You might think that building decking on a slope is a no-go, but it’s actually a great way to help you make use of your garden when the ground is sloping. It will provide you with a level surface that you can BBQ on as well as dine alfresco without finding that your meal is rolling down the table. But how do you build decking on a slope? Our guide in the FAQ above, ‘How to build a raised deck’, is the perfect solution – but we’ll break it down here if you just want to get an idea of what’s involved. Dig out the area If you’re laying on soil or turf, you’ll need to dig it out. Dig down and remove all the turf from the area and ensure that there are no weeds or stones in the area you’re going to build your decking on. Since you’re building on a slope, it will be hard to get it level, but dig out to a depth of 50mm and lay weed-control fabric with gravel over the top. Add posts and set with concrete Make holes for posts and add them in, ensuring they’re longer than you need. Make sure they’re level, then fill the holes with a concrete mix to set them in place. Build the outer frame Make sure you always work at the top of the slope when you’re building your decking, and measure where the highest point of the decking will be. Secure the 4 sides of the outer frame and factor in a 2mm fall for every metre of decking so rainwater can run off. Add joists Secure joists along your frame at 400mm intervals. If you get to the last joist and there will be more than a 400mm gap left at the end, add in an extra one for support. Lay your deck boards Screw your deck boards to the joists, ensuring that the deck boards are running in the opposite direction to the joists. For timber boards, you need to make sure you leave an expansion gap of 5-8mm. These steps should give you an idea of whether you want to have a go at building decking on a slope, or whether you want to leave it to the pros.

Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:

Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
Add a central step riser to stairs wider than 900mm to prevent them buckling
Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth

Getting started To build your steps for the deck, you’ll need:

Step treads (the actual step themselves)
Step risers
Coach screws
Deck screws
Saw
Drill

Make the steps for your deck

Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
After drilling pilot holes, screw the treads into the risers at each end with deck screws.
If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.

Other Top Projects in Yarm

Customer Reviews

Overall rating:

Yarm Wooden decking installers are rated 4.5 out of 5 based on 4 reviews of 24 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Yarm Wooden decking contractors

Are you a carpenter in Yarm?

We can help you get more Wooden decking work and boost your business.

Join today