Wooden Decking in Tain

Get Wooden Decking Prices in Tain

Home > Gardening & Landscaping Projects > Wooden decking > Tain

Wooden Decking in Tain

Wooden decking is an increasingly common option for creating outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very fashionable areas which you can use year round by using additional heating and lighting. Wooden decking is usually fitted in locations in front of patio or French doors where they can create a smooth transition between interior and exterior spaces. Wooden decking can come in any size or shape to complement any area. Curved designs or large areas linked by pathways can produce an attractive effect. Wooden decking is fairly quick to install and causes little disruption, especially when compared to alternatives like patio or paving. It can even be installed over the top of a pre-existing patio. It is crucial however to be sure that your wooden decking is structurally sound and capable of taking the weight of any furniture or plants that you want to use on the decking. There is a choice of species of wood that can be used in wooden decking. Normally decking is made of hardwood, but there are softwoods available that fulfil the durability specifications. As hardwood decking will demand maintenance, which usually will involve yearly cleaning and staining for weather proofing, composite woods are becoming popular for use in wooden decking as they are stronger and require much less maintenance.

Average Wooden decking cost in Tain

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2025

Avg. price low

Avg. price low
£1,125

Avg. price

Avg. price
£1,500

Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Tain, as reported by local LeadsDoWork members.

Wooden decking installation cost in Tain 2025

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in March 2025

Wooden decking Projects in Tain in February 2025

324

Requests for quotations in Tain in February 2025

0

Requests for Wooden decking quotations in Tain in February 2025. 0% change from January 2025.

0

Requests for Wooden decking quotations in Highland in February 2025. 0% change from January 2025.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Tain February 2025

Tain

Tain is an imperial burgh as well as parish in the Area of Ross, in the Highlands of Scotland. The name derives from the nearby River Tain, the name of which comes from an Indo-European origin meaning 'circulation'. The Gaelic name, Baile Dubhthaich, indicates 'Duthac's town', after a regional saint additionally known as Duthus. Tain was approved its first imperial charter in 1066, making it Scotland's earliest royal burgh, honored in 1966 with the opening of the Rose Garden by Queen Elizabeth, the Queen Mother. The 1066 charter, provided by King Malcolm III, validated Tain as a haven, where people can declare the protection of the church, as well as an immunity, in which homeowner merchants as well as investors were exempt from particular taxes. These led to the advancement of the community. Little is understood of earlier background although the community owed a lot of its significance to Duthac. He was a very early Christian number, perhaps 8th or 9th century, whose temple had come to be so essential by 1066 that it led to the imperial charter. The messed up church near the mouth of the river was stated to have been built on the site of his birth. Duthac came to be a main saint in 1419 and by the late Middle Ages his shrine was a crucial areas of trip in Scotland. King James IV came with least once a year throughout his regime to attain both spiritual as well as political goals. A leading landowning family members of the location, the Clan Munro, gave political and also religious figures to the town, consisting of the dissenter Rev John Munro of Tain (died ca. 1630). The very early Duthac Chapel was the centre of a refuge. Fugitives were by custom given sanctuary in several square miles marked by border stones. Throughout the First War of Scottish Independence, Robert the Bruce sent his better half and also little girl to the sanctuary for security. The shelter was breached as well as they were caught by forces loyal to William II, Earl of Ross who handed them over to Edward I of England The ladies were taken to England and also maintained detainee for several years.

Looking for Wooden decking in Tain?

Get free quotes from local carpenters

Get free quotes

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Tain

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Tain.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
How to lay decking?
Laying simple, ground-level decking may sound intimidating, but it doesn’t have to be. With careful planning and preparation, you can lay decking that you’ll be proud to show off to neighbours, family and friends. Here are a few tips to get you started. Plan carefully Draw out a plan, to scale, on paper. This will help you to know how many boards you’ll need and ensure that you don’t end up having to cut anything to fit. Prepare the area Measure out the site according to your plan and hammer a peg into each corner, then tie string around each peg to help you see what you’re working with. If you’re not laying on existing slabs, dig into the ground, lifting out turf if it’s there, and check that the site is level. Then add concrete slabs for more stability or lay weed-control fabric over the ground and cover with gravel to further prevent weed growth. Build your sub-frame Since a lot of people ask this, we’ve got a more detailed guide in the FAQ below. Lay your deck boards
  1. Start in one corner of the sub-frame and position the first board across the inner joists. You want the deck board in the opposite direction to the inner joists, ensuring that it’s flush with the frame. Position any end-to-end joins between the deck boards halfway across an inner joist so you can screw both boards into the joist for stability. Make sure you keep a gap of between 5-8mm to allow for expansion of the wood.
  2. Begin to screw your deck boards to the joists. You’ll need to secure the deck board to every joist is covers along your deck frame. Use two screws for every joist. Mark where you’re going to add your screws, ensuring that they are at least 15mm from the end of the board and 20mm from the outside edges. Drill pilot holes for the screws, being careful to only drill through the deck board and not the joist. Then screw the decking screws into the holes.
  3. Continue to screw in the deck boards, ensuring you leave the correct expansion gap. You can stagger the deck board joins across the deck for more strength.
  4. Sand down any cut ends if you need to before applying decking preserver to protect the timber from rotting.
Although this is a simplified set of instructions, it’s enough for you to see whether you want to attempt to lay decking yourself – and if you don’t, you can get in touch with professionals who will be happy to give you a quote.

How to build decking on a slope?
You might think that building decking on a slope is a no-go, but it’s actually a great way to help you make use of your garden when the ground is sloping. It will provide you with a level surface that you can BBQ on as well as dine alfresco without finding that your meal is rolling down the table. But how do you build decking on a slope? Our guide in the FAQ above, ‘How to build a raised deck’, is the perfect solution – but we’ll break it down here if you just want to get an idea of what’s involved. Dig out the area If you’re laying on soil or turf, you’ll need to dig it out. Dig down and remove all the turf from the area and ensure that there are no weeds or stones in the area you’re going to build your decking on. Since you’re building on a slope, it will be hard to get it level, but dig out to a depth of 50mm and lay weed-control fabric with gravel over the top. Add posts and set with concrete Make holes for posts and add them in, ensuring they’re longer than you need. Make sure they’re level, then fill the holes with a concrete mix to set them in place. Build the outer frame Make sure you always work at the top of the slope when you’re building your decking, and measure where the highest point of the decking will be. Secure the 4 sides of the outer frame and factor in a 2mm fall for every metre of decking so rainwater can run off. Add joists Secure joists along your frame at 400mm intervals. If you get to the last joist and there will be more than a 400mm gap left at the end, add in an extra one for support. Lay your deck boards Screw your deck boards to the joists, ensuring that the deck boards are running in the opposite direction to the joists. For timber boards, you need to make sure you leave an expansion gap of 5-8mm. These steps should give you an idea of whether you want to have a go at building decking on a slope, or whether you want to leave it to the pros.
Can I fit a hot tub on my terrace or decking?

Yes, although you should make sure that the terrace or decking is able to support the weight of a hot tub. Usually, you will need to have a structural survey carried out on the area. Seek the advise of a hot tub retailer or installer about the logistics of installing one at your property.

Placholder Image

Other Top Projects in Tain

Customer Reviews

Overall rating:


Tain Wooden decking installers are rated 0 out of 5 based on 0 reviews of 7 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Tain Wooden decking contractors
Leaking flat roof repair for extension in Wirral Published: 01/03/2025 Need a leaking flat roof repaired in Wirral? Learn about the best solutions, costs, and how to prevent future water ingress. Read this article
Cast iron gutter repair and repainting for church in Derby Published: 01/03/2025 Need cast iron guttering repaired and repainted at your church in Derby? Learn about the process, costs, and how to preserve historic gutters. Read this article
Storm damaged polycarbonate roof panel replacement in Falkirk Published: 01/03/2025 Need a storm-damaged polycarbonate roof panel replaced in Falkirk? Learn about the repair process, costs, and how to prevent future damage. Read this article

Are you a carpenter in Tain?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today