Wooden Decking in Pwllheli

Discover Wooden Decking Prices in Pwllheli

Trustpilot 4.5 stars
Home > Gardening & Landscaping Projects > Wooden decking > Pwllheli

Wooden Decking in Pwllheli

Wooden decking is an increasingly common option for providing outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very beautiful areas which can be used year round with the help of outside heating and light. Wooden decking is frequently installed in locations in front of patio or French doors where they can create a smooth transition between interior and exterior spaces. Wooden decking can come in any size or shape to fit any area. Curved designs or large areas connected by pathways can produce a striking effect. Wooden decking is fairly simple to install and causes minimal disruption, especially in comparison to alternatives like patio or paving. It could even be installed over the top of an existing patio. It is critical however to be sure that your wooden decking is structurally sound and able to take the load of any furniture or plants that you would like to use on the decking. There is a range of species of wood that can be used in wooden decking. Normally decking is made of hardwood, but there are softwoods available that fulfil the durability specifications. As hardwood decking will require maintenance, which generally involves yearly cleaning and staining for weather proofing, composite woods have become popular for use in wooden decking as they are stronger and require far less maintenance.

Average Wooden decking cost in Pwllheli

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2025

Avg. price low

Avg. price low
£1,125
Avg. price

Avg. price
£1,500
Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Pwllheli, as reported by local LeadsDoWork members.

Wooden decking installation cost in Pwllheli 2025

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in January 2025

Wooden decking Projects in Pwllheli in December 2024

294

Requests for quotations in Pwllheli in December 2024

0

Requests for Wooden decking quotations in Pwllheli in December 2024. 0% change from November 2024.

0

Requests for Wooden decking quotations in Gwynedd in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Pwllheli December 2024

Wooden decking near you

Pwllheli

Pwllheli is an area and the major market town of the Llyn Peninsula (Welsh: Penrhyn Llyn) in Gwynedd, north-western Wales. It had a population of 4,076 in 2011 of whom a big percentage, 81%, are Welsh talking. Pwllheli is the location where Plaid Cymru was founded. It is the birthplace of the Welsh poet Sir Albert Evans-Jones (bardic name Cynan). Pwllheli has a series of shops as well as various other solutions. As a regional railhead with a market every Wednesday, the town is a gathering point for the population of the whole peninsula. For many years a holiday camp run by Butlins ran a couple of miles from Pwllheli at Pen-y-chain. During the Second World War it came to be a marine camp, HMS Glendower, as well as it ran a healthcare facility for wounded servicemen at Brynberyl on the Pwllheli to Caernarfon roadway 2 miles out of town. After the war, Butlins re-established the holiday camp. The camp, currently relabelled Hafan y Môr ("Haven of the Sea"), has been redeveloped as well as is currently run by the Haven team.

Looking for Wooden decking in Pwllheli?

Get free quotes from local carpenters

Get free quotes

Similar Customer Enquiries for Wooden decking in Pwllheli

09 May

Garden | Decking

Pwllheli - LL53

Enquiry from: Cristina C

Start Date: Immediate

Advice on either rear patio

Post a similar request >

14 Jul

Garden | Decking

Pwllheli - LL53

Enquiry from: Caroline B

Start Date: Immediate

Grass is very overgrown and needs cutting asap. For regular garden maintaining and also looking for landscaping design and build, decking, driveway, patios etc Are you the property owner: Owner Proper...

Post a similar request >

12 Jan

Garden | Decking

Pwllheli - LL53

Enquiry from: Tracy F

Start Date: 1 to 3 months

We need to have decking put down outside our caravan, approx. 6.5 x 2.5 m. It doesn't need to be anything fancy as an awning will be going over it. Homeowner Supplied and fitted Please contact to...

Post a similar request >

22 May

Garden | Decking

Criccieth - LL52

Enquiry from: Hugh J

Start Date: Immediate

Are you the property owner: Owner of the property Property Type: Detached Time scale: Immediate Other Forms: None Please call to appoint

Post a similar request >

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Pwllheli

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Pwllheli.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to fit composite decking?
Fitting composite decking is similar to installing timber decking, but there are some small differences in terms of the gaps you need to leave between boards and the screws you use. We’ll go through a quick guide to show you the process involved in fitting composite decking so you can decide whether it’s something you want to do yourself. Prepare the area Prepare the area according to our instructions in the previous FAQs – or you can use an existing patio or concrete base if you have one. Measure and mark out the area using chalk (if using an existing base). Assemble the decking frame Build the outer frame as we show in our FAQs above; if the area you have planned is longer than your joists, you’ll need to join them together. When you’ve built the frame and it’s secure, ensure that it’s at the right level for water runoff and add risers, slabs or treated off-cuts of timber at 500mm intervals if you need to. Add joists The spacing of your joists will depend on the type of design you have chosen for your composite decking. If you’re laying arched boards horizontally, you’ll need to space the joists 300mm apart. Lay your composite decking boards
  1. If you’ve not got an overhang or it’s a fixed deck, fit starter clips along the outside edge of the frame and secure with screws provided with the composite decking. If you are working with an overhang, put the first board into position not exceeding 25mm. If you’re adding a fascia, put an off-cut of board under the overhang so you know it’ll be flush with the fascia.
  2. Pre-drill all fixing points, measuring in 30mm from the edge of the board. Secure the board to the joist below with composite decking screws.
  3. Slide a hidden fastener clip in so it sits within the groove of the deck board. It needs to be in the centre of the joist to keep the boards secure and ensure an expansion gap of 6mm. Tighten the clips until just tight, and repeat so there’s a clip at every joist.
  4. Add the next board, ensuring that the fastener clips sit within the groove – make sure you don’t force it. Repeat step 3.
  5. Continue steps 3 and 4 until you’re at the final board, which you should secure in the same way as you did the first.
Add a fascia board If you’re adding a fascia, measure in 40mm from each end and add two guide marks: one at 40mm from the top and the other at 40mm from the bottom. Connect the marks, then mark at 300mm intervals down the board. Drill pilot holes, then put the fascia board into position. You need to make sure that there’s a 40mm ventilation gap between the bottom of the fascia and the ground. Ask someone to hold the board level until you’ve finished securing it with composite decking screws; you can get colour-matched ones so they don’t look unsightly at the end of your decking. Not so sure you want to carry out such a big project yourself? Get quotes from decking pros who will be able to fit composite decking much more quickly and easily.
How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
Placholder Image

Other Top Projects in Pwllheli

Related Projects

Customer Reviews

Overall rating:


Pwllheli Wooden decking installers are rated 3.9 out of 5 based on 3 reviews of 34 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Pwllheli Wooden decking contractors

Useful Wooden decking Links

Are you a carpenter in Pwllheli?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today