Wooden Decking in Llwyngwril

Obtain Wooden Decking Prices in Llwyngwril

Home > Gardening & Landscaping Projects > Wooden decking > Llwyngwril

Wooden Decking in Llwyngwril

Wooden decking is an increasingly common option for providing outdoor seating areas in gardens. Due to the natural beauty of wood, they can be very beautiful areas which you can use year round by installing external heating and illumination. Wooden decking is generally installed in locations in front of patio or French doors where they can create a smooth transition between inside and outside spaces. Wooden decking can come in virtually any size or shape to suit any area. Curved designs or large areas linked by pathways can create a stunning effect. Wooden decking is fairly simple to install and causes little disruption, particularly when compared to alternatives like patio or paving. It could even be installed over the top of a pre-existing patio. It is necessary however to be sure that your wooden decking is structurally sound and able to take the load of any furniture or plants that you would like to use on the decking. There is a range of varieties of wood that can be used in wooden decking. Usually decking is constructed from hardwood, but there are softwoods available that fulfil the durability specifications. As hardwood decking will need maintenance, which commonly consists of yearly cleaning and staining for weather proofing, composite woods have become popular for use in wooden decking as they are stronger and require significantly less maintenance.

Average Wooden decking cost in Llwyngwril

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2024

Avg. price low

Avg. price low
£1,125

Avg. price

Avg. price
£1,500

Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Llwyngwril, as reported by local LeadsDoWork members.

Wooden decking installation cost in Llwyngwril 2024

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in November 2024

Wooden decking Projects in Llwyngwril in October 2024

69

Requests for quotations in Llwyngwril in October 2024

0

Requests for Wooden decking quotations in Llwyngwril in October 2024. 0% change from September 2024.

0

Requests for Wooden decking quotations in Gwynedd in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Llwyngwril October 2024

Llwyngwril

Llwyngwril is a seaside village, in Llangelynnin neighborhood, 2 miles north of the town of Llangelynnin and also eleven miles south-west of Dolgellau. It remains in the county of Merionethshire, Wales, although presently administered as part of the unitary authority of Gwynedd. The train and also road leave the shore as well as the village is sandwiched between the hills and also the sea. The population according to the 2011 census was 526, with 56.7% of the population birthed in England, making it very Anglicised. The town of Llwyngwril is located to the west of the A493 coastal road between Fairbourne, some 3 miles to the north and also the town of Llangelynnin, 2 miles to the south, at the mouth of the River Gwril. In this part of Barmouth Bay, the straight coastline has a northwesterly element, the railway runs close to the shore with the coastal road just inland behind which capitals increase outstanding. The village contains a variety of homes, a store, bar and also had a primary school until a few years earlier. The village remains in the church of Llangelynnin, which has two churches, both devoted to Saint Celynnin. The original parish church goes to Llangelynnin and also the more contemporary one is in the centre of Llwyngwril. Saint Celynnin is a middle ages saint that is typically though to be a boy of Helig ap Glannog. He and also his bros were all thought about saints and the church at Llangelynnin in the Conwy Valley is additionally devoted to him. Llwyngwril railway station is a request quit. One more notable structure in the town is the Salem Chapel. It is painted blue and also is occasionally known as the Blue Chapel, and also from the outside resemble a common Welsh Non-conformist Chapel. However the inside is a sophisticated combination of Gothic-style functions consisting of simulated rock stairs, timber carvings, luxuriant ceilings, arched home windows, marble fire places and an organ gallery total with a plywood organ. From the beach you can often see Dolphins heading past in Cardigan bay. There are lots of self-catering residential or commercial properties to rent and also caravan as well as camping sites either in or really close to the town, including Sunbeach as well as Hendre Hall.

Looking for Wooden decking in Llwyngwril?

Get free quotes from local carpenters

Get free quotes

How it works

Tell us about your Wooden decking project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Carpenters in Llwyngwril

Get free, no-obligation quotes from 4 verified Carpenters working in Llwyngwril.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to build a raised deck?
Building a raised deck will take some time and is trickier than laying standard decking at ground level, but if you want to build decking on a slope or uneven ground it’s the best way to do it. If you do your research and follow instructions, you and a friend or family member can build a raised deck over a few days. Here’s a simplified guide of the steps you’ll need to take. Plan carefully It’s best to plan your raised deck by drawing it to scale on paper before you go and get supplies. This will help avoid wastage and making more cuts to timber than necessary. Prepare the area Prepare the area according to the instructions we give in the FAQ ‘How to lay decking’. However, because you’re building a raised deck, you’ll need to add posts:
  1. Place a post in the corner of the frame you created with the pegs and string. Measure and mark out 100mm from each side.
  2. Dig out this soil to a depth of 700mm (watch out for cables or pipes). You should have a 300 x 300mm hole. Repeat for the other 3 corners.
  3. Using a brick bolster, split a concrete block in two. Put a section of the block in each hole.
  4. Get a length of post longer than you need and place one in each hole. You can cut it down later.
  5. Create props on each post to hold them in place until you’re ready to add a cement mix. Check that they’re level. When you’re happy that they are, secure them in place with a concrete mix, making sure you create a slope in the concrete so that rainwater runs away from each post. When the concrete is set, remove the props.
  6. Create a string line around each corner post and find the centre point between each. Place a timber batten at each point, ensuring that they’re not spaced any more than 1500mm apart.
Make the outer frame
  1. Working from the corner where the deck will be at its highest above ground level, measure and mark on the post where the highest part of the frame will be.
  2. Measure from the far side of one post to the opposite and cut sections of joist to size. Line up a piece of joist with the mark you made and temporarily secure it. Factor in a 2mm fall for every metre of decking so rainwater can run off.
  3. Secure the frame to the other corner post, ensuring it’s at the right level. Do this for every side of the outer frame.
  4. Using 100mm coach screws with washers hanging on the end, secure each end of the four sections of frame.
  5. Mark out where the centre of the support posts will be and secure all of these posts to the frame, except the centre post.
  6. Add your central support joists. These should run in the same direction as the deck boards will run. You’ll need to measure from the inside of the frame on one side to the inside of the frame on the opposite side. Attach the joist in the same way as you did for the other posts. Repeat so the centre post is in between two sections of frame and secure the posts with concrete.
  7. Trim down all the posts to the correct height using a saw.
  8. Add your weed-control fabric and weigh down with gravel across the entire area.
Add your joists
  1. Measure 400mm from the centre of the outer frame and mark a line. This will be where the first joist is positioned. Repeat at 400mm intervals down the length of the frame – if the last one will be more than 400mm, add another joist to create enough support.
  2. Attach a joist hanger to each end of the joist.
  3. Place the joist in position so the centre lines up with the 400mm spacer mark.
  4. Secure using external grade screws once you’re happy that the joist is flush with the frame.
Lay your decking boards Refer to our FAQ on how to lay decking to see how you should attach your decking boards. Remember: Always treat cut ends and pilot holes with decking preservative to keep your decking in good condition for as long as possible. Building a raised deck isn’t a straightforward task. If you’d rather leave it to the professionals, get a range of quotes to help you get the best price and a high quality finish.
Can I fit a hot tub on my terrace or decking?

Yes, although you should make sure that the terrace or decking is able to support the weight of a hot tub. Usually, you will need to have a structural survey carried out on the area. Seek the advise of a hot tub retailer or installer about the logistics of installing one at your property.

How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
Placholder Image

Other Top Projects in Llwyngwril

Are you a carpenter in Llwyngwril?

We can help you get more Wooden decking work and boost your business.

Join today