Damp Proofing in York
Extensions including garage conversions will typically require extra damp proofing to be added through the conversion, as the existing garage typically has a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be updated as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be carried out by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, and so is it important to make sure that your garage conversion makes use of appropriate damp proofing methods.