Damp Proofing in Wigan
Extensions such as garage conversions will typically require additional damp proofing to be installed during the conversion, as the pre-existing garage routinely has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be improved as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be carried out by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, and so is it vital to ensure that your garage conversion employs suitable damp proofing methods.