Damp Proofing in Whitstable
Extensions such as garage conversions will usually require supplementary damp proofing to be added through the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may need to be improved as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, and so is it important to ensure that your garage conversion incorporates suitable damp proofing methods.