Damp Proofing in Southminster
Extensions such as garage conversions will often require additional damp proofing to be installed through the conversion, as the pre-existing garage routinely has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Additionally, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might need to be improved as part of the conversion in order to meet current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This can be performed by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, and so is it important to make sure that your garage conversion makes use of suitable damp proofing methods.