Damp Proofing in Ingatestone
Extensions including garage conversions will typically require additional damp proofing to be added during the conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by employing a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be updated as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be accomplished by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it important to ensure that your garage conversion makes use of appropriate damp proofing methods.