Damp Proofing in West Bromwich
Extensions such as garage conversions will typically require extra damp proofing to be installed through the conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Moreover, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This can be performed by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, therefore is it important to make sure that your garage conversion employs appropriate damp proofing methods.