Damp Proofing in Wellingborough
Extensions such as garage conversions will typically require extra damp proofing to be added as part of conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be achieved by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might need to be updated as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it necessary to ensure that your garage conversion makes use of suitable damp proofing methods.