Damp Proofing in Southend-on-sea
Extensions such as garage conversions will usually require extra damp proofing to be added during the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be performed by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be improved as part of the conversion in order to comply with current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to make sure that your garage conversion employs appropriate damp proofing methods.