Damp Proofing in Newry
Extensions such as garage conversions will usually require supplementary damp proofing to be added during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will often be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this may need to be improved as part of the conversion in order to meet current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should adhere to, and so is it necessary to make sure that your garage conversion employs suitable damp proofing methods.