Damp Proofing in Hillsborough
Extensions such as garage conversions will usually require extra damp proofing to be installed as part of conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This is accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, therefore is it important to make sure that your garage conversion makes use of suitable damp proofing methods.