Damp Proofing in Clogher
Extensions including garage conversions will often require extra damp proofing to be added as part of conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Furthermore, the roofing of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will most likely be performed by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might have to be updated as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This can be done by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, and so is it vital to ensure that your garage conversion employs suitable damp proofing methods.