Damp Proofing in Cookstown
Extensions such as garage conversions will typically require supplementary damp proofing to be installed through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing should be added to walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might need to be improved as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is done by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, and so is it important to ensure that your garage conversion employs appropriate damp proofing methods.