Damp Proofing in Lowestoft
Extensions such as garage conversions will typically require supplementary damp proofing to be added through the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will most likely be achieved by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might need to be improved as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is carried out by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it important to ensure that your garage conversion incorporates appropriate damp proofing methods.