Damp Proofing in Attleborough
Extensions such as garage conversions will usually require supplementary damp proofing to be installed through the conversion, as the existing garage routinely has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this might have to be updated as part of the conversion in order to comply with current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This can be done by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should adhere to, therefore is it important to make sure that your garage conversion incorporates suitable damp proofing methods.