Damp Proofing in Kingswinford
Extensions including garage conversions will usually require extra damp proofing to be added as part of conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be done by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, and so is it necessary to ensure that your garage conversion employs appropriate damp proofing methods.