Damp Proofing in Kettering
Extensions such as garage conversions will typically require additional damp proofing to be added through the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing should be added to walls and floors. In addition, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this may have to be updated as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This is carried out by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.