Damp Proofing in Hunstanton
Extensions such as garage conversions will often require additional damp proofing to be installed during the conversion, as the pre-existing garage routinely has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be updated as part of the conversion in order to adhere to current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, and so is it necessary to make sure that your garage conversion makes use of appropriate damp proofing methods.