Damp Proofing in High Peak
Extensions such as garage conversions will often require additional damp proofing to be installed through the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will usually be achieved by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be improved as part of the conversion in order to adhere to current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This can be accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, and so is it important to make sure that your garage conversion employs appropriate damp proofing methods.