Damp Proofing in Dudley
Extensions such as garage conversions will usually require additional damp proofing to be added during the conversion, as the existing garage will often have a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might have to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be carried out by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, therefore is it important to ensure that your garage conversion employs appropriate damp proofing methods.