Artex is a product used for surface decorating inside the inside of homes. It is generally worked with to add a textured surface to ceilings. Artex remains popular instead of smooth plaster ceilings, and an experienced painter and decorator should have the ability to apply artex in a range of different textured pattern finishes. Artex refers to a specific brand, but there are more manufacturers who produce very similar products. Older artex ceilings may be restored as well. There are a range products and applicators available for purchase to make this method as convenient as possible. There is a wide range of different alternatives for the sorts of texture which artex may be used to produce. It could be administered in stipple, swirl, or shell effects, all of which is often done as a Do It Yourself task comparatively easily. Knowledgeable painters and decorators can review with you which effect would best go with your area, and make sure that artex is applied in a high quality and uniform finish. Artex can also be painted over, and choosing a colour that goes with the texture of the surface area can restore a tired ceiling and breathe life into an area.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Motherwell in December 2024
Requests for Artexing quotations in Motherwell in December 2024. 0% change from November 2024.
Requests for Artexing quotations in Lanarkshire in December 2024. 0% change from November 2024.
Motherwell is a big town in North Lanarkshire, to the southeast of Glasgow together with a population of 30,311. The major Scottish town also offers a population density of 5,500 individuals per square mile. Motherwell has recovered from high unemployment and economical decline brought on by the collapse of large industry. For home upgrades you're considering in the near future, you'll want to make use of vetted companies in Motherwell and add value to your house.
Motherwell - ML1
Enquiry from: Ronnie M
Start Date: Immediate
2 bedroom ceilings 1 living room ceiling 1 kitchen ceiling 1small hallway ceiling 1 small bathroom ceiling to remove the artex are you the property owner: owner of the property property type: residen...
Glasgow - G77
Enquiry from: Arshad M
Start Date: Immediate
Water damaged ceiling repaired new plasterboard to be artexed to blend in with rest of ceiling
Glasgow - G74
Enquiry from: Hayley C
Start Date: Immediate
Customer visited the myplasteringprices.co.uk site and submitted an enquiry. Property type: Terrace, Work description: Skim kitchen ceiling . Skim walls . ( new kitchen has been installed ) walls al...
Answer a few quick questions, so we can match you with local plasterers who can help.
Get free, no-obligation local artexing quotes from 4 verified plasterers working in Motherwell.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
We can help you get more artexing work with our qualified job leads and boost your business.
Join today