Artex is a product that is used for for surface decorating inside home interiors. It is often chosen to add a textured surface to ceilings. Artex remains fashionable as a substitute to smooth plaster ceilings, and a skilled painter and decorator will have the ability to apply artex in a number of different textured pattern finishes. Artex refers to a particular manufacturer, however there are some other manufacturers who create similar products. Older artex ceilings may be restored as well. There are a variety of products and applicators available for purchase to make this task as quick as possible. There is a wide array of of different alternatives for the types of texture that artex can be applied in. Stipple, swirl, or shell effects could be administered, all of which can be undertaken as a DIY task fairly easily. Skilled painters and decorators can discuss with you which result would best go with your room, and make sure that artex is applied to produce a top quality and consistent texture. Artex can even be painted over, and picking out a shade which goes well with the texture of the surface area can renew an old ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Johnstone in December 2024
Requests for Artexing quotations in Johnstone in December 2024. 0% change from November 2024.
Requests for Artexing quotations in Renfrewshire in December 2024. 0% change from November 2024.
Johnstone is a town in the council area and county of Renfrewshire in the west central Lowlands of Scotland. It is found 3 miles west of Paisley, 12 miles west of the centre of the city of Glasgow and 12 miles north east of Kilwinning. Constituting a section of the largest conurbation in Scotland, Johnstone rests on the western side of the Greater Glasgow Urban Area. Johnstone was a planned neighborhood, which formed around the house of Easter Cochrane, now called Johnstone Castle. Construction commenced in 1782 when the Laird George Houston approved concepts for a range of residential seats forming the town centre. The building of two identical civic squares, Houstoun Square and Ludovic Square, and the town gained its parish church by 1794. Coal mining started to bring wealth to Johnstone in the 19th century, with the population increasing to 5600 in 1831. Such a growth in population meant the boost in slum conditions up until the advancement of an area of the town to incorporate a substantial quantity of purpose-built domestic estates, occurring in the 1930s. Much of Johnstone's history preceding industrialisation has actually vanished, with Johnstone Castle ending up being derelict after the last Laird died in 1931. The town's population of 15687 is well-connected to the rest of Scotland due to its proximity to reliable transportation links. A dual carriageway links Johnstone to the M8 motorway for transportation links to central Scotland, and the town provides 2 railway stations with routine trains to Glasgow Central, Paisley and the Ayrshie Coast. Those wanting to explore more afar are 3.5 miles away from Glasgow International Airport and 40 minutes away by train from Prestwick International Airport. For all of your house upgrades, make certain to make use of trusted experts in Johnstone to make certain of quality.
Johnstone - PA5
Enquiry from: Ann B
Start Date: Immediate
kitchen and bedroom ceilings artexed are you the property owner: tenant (with permission) property type: residential what are you looking to artex: ceiling how many ceilings do you require artexing: 2...
Johnstone - PA6
Enquiry from: Gordon T
Start Date: Immediate
single garage conversion ceiling light artex to match rest of house
Glasgow - G77
Enquiry from: Arshad M
Start Date: Immediate
Water damaged ceiling repaired new plasterboard to be artexed to blend in with rest of ceiling
Largs - KA29
Enquiry from: Marion M
Start Date: Immediate
Artex wall in lounge
Glasgow - G74
Enquiry from: Hayley C
Start Date: Immediate
Customer visited the myplasteringprices.co.uk site and submitted an enquiry. Property type: Terrace, Work description: Skim kitchen ceiling . Skim walls . ( new kitchen has been installed ) walls al...
Answer a few quick questions, so we can match you with local plasterers who can help.
Get free, no-obligation local artexing quotes from 4 verified plasterers working in Johnstone.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
We can help you get more artexing work with our qualified job leads and boost your business.
Join today