Wooden Decking in Ullapool

Get Wooden Decking Prices in Ullapool

Home > Gardening & Landscaping Projects > Wooden decking > Ullapool

Wooden Decking in Ullapool

Wooden decking is an increasingly common option for creating outdoor seating areas in gardens. Due to the natural beauty of wood, they can be very fashionable areas which can be used year round by installing additional heating and light. Wooden decking is usually installed in locations in front of patio or French doors where they can create a smooth transition between inside and outside spaces. Wooden decking is available in virtually any size or shape to match any area. Curved designs or large areas connected by pathways can create an attractive effect. Wooden decking is relatively quick to install and causes little disruption, particularly when compared to other possibilities like patio or paving. It can even be installed over the top of an existing patio. It is important however to make sure that your wooden decking is structurally sound and able to take the load of any furniture or plants that you want to use on the decking. There is a collection of varieties of wood that can be used in wooden decking. Generally decking is constructed from hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will demand maintenance, which commonly will involve annual cleaning and staining for weather proofing, composite woods have become more popular for use in wooden decking as they are more robust and require far less maintenance.

Average Wooden decking cost in Ullapool

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2024

Avg. price low

Avg. price low
£1,125

Avg. price

Avg. price
£1,500

Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Ullapool, as reported by local LeadsDoWork members.

Wooden decking installation cost in Ullapool 2024

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in November 2024

Wooden decking Projects in Ullapool in October 2024

192

Requests for quotations in Ullapool in October 2024

0

Requests for Wooden decking quotations in Ullapool in October 2024. 0% change from September 2024.

0

Requests for Wooden decking quotations in Highland in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Ullapool October 2024

Ullapool

Ullapool is a village of around 1,500 citizens in Ross and Cromarty, Scottish Highlands, found around 45 miles (72 km) north-west of Inverness. Regardless of its tiny dimension it is the biggest negotiation for lots of miles around, as well as a vital port and also vacationer destination. The North Atlantic Drift passes Ullapool, regulating the temperature. A couple of Cordyline australis (New Zealand cabbage trees) are expanded in the town and are typically incorrect for hand trees. The community rests on Loch Broom, on the A835 road from Inverness. The Ullapool River moves through the village. On the east coast of Loch Broom, Ullapool was founded in 1788 as a herring port by the British Fisheries Society. It was created by Thomas Telford. Before after that the town was just a trivial hamlet of simply over 20 families. The harbour is still the edge of the community, used as an angling port, yachting haven, and also ferryboat port. Ferryboats cruise to Stornoway in the Outer Hebrides. The village was historically in Cromartyshire, a county comprised of numerous separate enclaves spread throughout north Ross-shire. Cromartyshire was eliminated as well as integrated with surrounding Ross-shire in 1890. Many of the crucial discoveries of the Victorian age that contributed to the growth of the concept of plate tectonics were made in this field, and there are still routine global geological seminars. It is called the leading geological hotspot in Scotland. Parliament granted permission in the 1890s for a railway from Ullapool to the major Highland network at Garve, yet the plan was abandoned due to insufficient funds. The name is perhaps originated from the Norse for "Wool farm" or "Ulli's farm".

Looking for Wooden decking in Ullapool?

Get free quotes from local carpenters

Get free quotes

Similar Customer Enquiries for Wooden decking in Ullapool

23 Jul

Garden | Decking

Ullapool - IV26

Enquiry from: Isobel M

Start Date: Immediate

we need decking, paths laid and maybe ramps to make garden wheelchair accessible. are you the property owner: owner of the property property type: detached what level of service do you require: supply...

Post a similar request >

How it works

Tell us about your Wooden decking project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Carpenters in Ullapool

Get free, no-obligation quotes from 4 verified Carpenters working in Ullapool.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
How to fit composite decking?
Fitting composite decking is similar to installing timber decking, but there are some small differences in terms of the gaps you need to leave between boards and the screws you use. We’ll go through a quick guide to show you the process involved in fitting composite decking so you can decide whether it’s something you want to do yourself. Prepare the area Prepare the area according to our instructions in the previous FAQs – or you can use an existing patio or concrete base if you have one. Measure and mark out the area using chalk (if using an existing base). Assemble the decking frame Build the outer frame as we show in our FAQs above; if the area you have planned is longer than your joists, you’ll need to join them together. When you’ve built the frame and it’s secure, ensure that it’s at the right level for water runoff and add risers, slabs or treated off-cuts of timber at 500mm intervals if you need to. Add joists The spacing of your joists will depend on the type of design you have chosen for your composite decking. If you’re laying arched boards horizontally, you’ll need to space the joists 300mm apart. Lay your composite decking boards
  1. If you’ve not got an overhang or it’s a fixed deck, fit starter clips along the outside edge of the frame and secure with screws provided with the composite decking. If you are working with an overhang, put the first board into position not exceeding 25mm. If you’re adding a fascia, put an off-cut of board under the overhang so you know it’ll be flush with the fascia.
  2. Pre-drill all fixing points, measuring in 30mm from the edge of the board. Secure the board to the joist below with composite decking screws.
  3. Slide a hidden fastener clip in so it sits within the groove of the deck board. It needs to be in the centre of the joist to keep the boards secure and ensure an expansion gap of 6mm. Tighten the clips until just tight, and repeat so there’s a clip at every joist.
  4. Add the next board, ensuring that the fastener clips sit within the groove – make sure you don’t force it. Repeat step 3.
  5. Continue steps 3 and 4 until you’re at the final board, which you should secure in the same way as you did the first.
Add a fascia board If you’re adding a fascia, measure in 40mm from each end and add two guide marks: one at 40mm from the top and the other at 40mm from the bottom. Connect the marks, then mark at 300mm intervals down the board. Drill pilot holes, then put the fascia board into position. You need to make sure that there’s a 40mm ventilation gap between the bottom of the fascia and the ground. Ask someone to hold the board level until you’ve finished securing it with composite decking screws; you can get colour-matched ones so they don’t look unsightly at the end of your decking. Not so sure you want to carry out such a big project yourself? Get quotes from decking pros who will be able to fit composite decking much more quickly and easily.
How to build decking on a slope?
You might think that building decking on a slope is a no-go, but it’s actually a great way to help you make use of your garden when the ground is sloping. It will provide you with a level surface that you can BBQ on as well as dine alfresco without finding that your meal is rolling down the table. But how do you build decking on a slope? Our guide in the FAQ above, ‘How to build a raised deck’, is the perfect solution – but we’ll break it down here if you just want to get an idea of what’s involved. Dig out the area If you’re laying on soil or turf, you’ll need to dig it out. Dig down and remove all the turf from the area and ensure that there are no weeds or stones in the area you’re going to build your decking on. Since you’re building on a slope, it will be hard to get it level, but dig out to a depth of 50mm and lay weed-control fabric with gravel over the top. Add posts and set with concrete Make holes for posts and add them in, ensuring they’re longer than you need. Make sure they’re level, then fill the holes with a concrete mix to set them in place. Build the outer frame Make sure you always work at the top of the slope when you’re building your decking, and measure where the highest point of the decking will be. Secure the 4 sides of the outer frame and factor in a 2mm fall for every metre of decking so rainwater can run off. Add joists Secure joists along your frame at 400mm intervals. If you get to the last joist and there will be more than a 400mm gap left at the end, add in an extra one for support. Lay your deck boards Screw your deck boards to the joists, ensuring that the deck boards are running in the opposite direction to the joists. For timber boards, you need to make sure you leave an expansion gap of 5-8mm. These steps should give you an idea of whether you want to have a go at building decking on a slope, or whether you want to leave it to the pros.
How much is decking?
How much decking costs depends on the type of material you go for, how big you want your decking to be and where you live in the country. But typically, the cost of decking is between £1,200 - £1,800. The most popular material for decking is pre-treated softwood, which will set you back around £1,000 for 15m2. Hardwood is more expensive but is more durable, and will cost approximately £2,000 for the same amount. Homeowners are also beginning to choose composite decking, which is made from recycled plastic and wood fibres, and is low-maintenance and eco-friendly. This will cost around £1,600 for 15m2, while uPVC which is also a low-maintenance option costs around £600. People tend to choose composite over uPVC because it looks more like natural timber. If you’re a competent DIYer, you might want to have a go at laying decking yourself which will set you back around £1,000 for a standard softwood timber deck. We think it’s worth paying the extra £600 for a professional to lay your decking, since they will be able to do it much more quickly. If you do want to try it yourself, we recommend leaving at least a whole weekend open to do it, but it’s likely to take you longer. Factor in the possibility of having to take time off work to complete it and it might be more cost-effective to leave it to the pros.
Placholder Image

Other Top Projects in Ullapool

Are you a carpenter in Ullapool?

We can help you get more Wooden decking work and boost your business.

Join today