uPVC Window Spraying in Wiltshire

This is one of the most common questions when it comes to upvc windows. If you’re also interested in knowing the possibility of spraying white upvc windows grey, then you’ve come to the right place! In this post, we aim to answer this question once and for all.

The short and simple answer to this question is yes, you can definitely spray white upvc windows grey! In fact, you can spray white upvc windows with any colour of your choice. So far, the most used colour is the anthracite grey, but you’re not restricted to that. You can also make use of agate grey, French grey, window grey, battleship grey and lots more! However, it should be noted that spraying white upvc windows grey is in no way an easy task as it requires lots of experience and practice.

The spraying process usually starts with a thorough cleaning of all the surfaces to be sprayed using a specialist solvent upvc cleaner. Once done, you’ll have to get rid of any existing silicone from around the frames because the paint won’t adhere properly to silicone. Upon completion, you can then proceed to masking up the surrounding brick or stone, glass, openings into room, furniture, paths or plants and many more to protect them from potential paint overspray. Now to spray the paint, you can make use of a spray gun and spray painter. Before you start painting, you can apply a light dust or mist coat to identify any contamination left on the surfaces. Once this has dried without any negative reactions, you should spray two further coats (some colours may require up to 3). leave for up to 20 minutes to dry and remove all masking.

The quick and simple answer to this question is yes, you can definitely spray upvc windows. The upvc looks incredibly great when new and still got that fresh look and smell to it, but like every other thing, with time it begins to fade and look dull. And once it starts to look scruffy there’s no going back no matter how much you cleaned or maintained it. Now instead of going for a replacement upvc windows which can be very costly, you can spend just a fraction of the replacement cost by spraying the upvc windows. The only instance where you’d not be able to paint your upvc window is if the upvc is new or just fitted. This is largely due to the fact that a special type of upvc paint is required. The upvc paint, generally, forms a type of seal and bonds itself to the upvc window. However, it has great difficulty binding to a new upvc but as a large extent of the upvc in the UK is established rather than new, this shouldn’t be a headache for most home and property owners.

Another common reason why people decide to update their upvc with painting is due to the sheer number of colours you can incorporate in the painting. With the wide range of available colours, home owners are spoilt for choices and would opt for the colour that’ll add further accent and style to their homes. What’s more? If you don’t find the specific colour you want in your provider’s catalogue, you can always ask for a mixed colour.

Over the years, UPVC spray painting has grown to become a standard practice. Previously, what was done when people wanted to change the colour of their UPVC window is simply to replace the old ones. However compared to the cost of replacing the units, it’s actually a lot easier to simply have your UPVC windows sprayed and even more importantly, at just a fraction of the replacement cost. If you’re thinking about spraying your upvc windows, then you’ve come to the right place! In this post, we’re going to take you through the entire process. However, if you lack the confidence needed to pull this off, we’d strong advise that you get in touch with a professional to avoid make costly errors or mistakes.

The first step to successful upvc window spraying is always to make sure that the upvc is properly cleaned by removing any loose dirt and residue, getting rid of any muck and grime which has developed over the years. You can also abrade the surface in a very light manner to leave upvc frames with a key to make the paint adhesions stronger. Once you’re done with the preparation, the obvious next step is masking off. This process requires you to protect the walls, glass, floors and brickwork from any potential over spray. To achieve this, you can make use of masking papers.

Upon completion of the masking off process, then its time to spray paint the upvc windows using a spray gun and spray painter. This requires a lot of practice as it could be very dangerous as you can inject yourself with paint, which can be seriously fatal.

If you’re planning to get a stair lift to be fitted in your home or property, one of the first things you’ll have to consider is whether your staircase is straight or curved as this would be the primary determinant of the stairlift type you’d go for. If you happen to have a curved staircase, you’d need to purchase a curved stairlift as only this can be fitted. Once you’ve identified the type of stair lift you need, then the next step is to determine the price to purchase and install such unit. In this post, we’re going to give you an idea of curved stairlift prices in order to help you make the best informed decisions possible. Let’s take a look!

Unfortunately, a quick and simple answer can’t be provided to this question as there are so many factors that influences the price of a curved stairlift. The bespoke nature of installing the necessary equipment is the main reason why the amount of new curved stairlifts greatly varies in the UK as well as the amount and complexity of the work required. For instance, if you purchase a curved stair lift with an intermediate landing, you’ll have to customize the track of the stair lift to fit your stairs which will make it a lot more expensive than ones without an intermediate landing.

With these in mind, providing an upfront and accurate estimate of a curved stairlift cost would be hard. As a result, this question can only be answered accurately taking into account all relevant factors by an expert after which they pay you a home visit. They’ll take into account whether  any existing fixtures and fitting will have to be removed or perhaps there’s a need for a custom feature to be installed and lots more.