Stud Wall/Plasterboarding in Leigh-on-sea

Find Stud Wall/Plasterboarding Prices in Leigh-on-sea

Home > Plastering & Ceilings Projects > Plasterboard dry lining > Leigh-on-sea

Stud Wall/Plasterboarding in Leigh-on-sea

Internal or partition walls can be moved or knocked down in your property, which can modify the area layout and create a substantial open plan room design for a good-sized living area or a kitchen diner. When moving or knocking through internal walls, it is important to understand both the sort of internal wall that it is, and whether or not it's a load bearing wall. Internal walls may be brick or block partitions, timber stud partitions, or even prefabricated wall panels. There are no shortcuts when it comes to ascertaining whether a wall is load bearing or not, it's always worth engaging the services of a structural engineer if you are not sure or cannot view original plans for your property. Load bearing walls can be relocated, but this may also be more expensive and involves adding additional load bearing methods, such as steel lintels. Moving or knocking through internal walls will usually involve demolition of the pre-existing wall, replacing or repairing the new walls, replastering and moving electrics. It could additionally require modifications to the floor, as in some cases the floors between rooms will not be completely level, and knocking through internal walls can expose this. Generally moving interior walls will not require planning permission, but you will need to comply with building regulations for insulation and sound proofing. Consulting a structural engineer will ensure that any internal wall changes that you plan on doing will keep your premises structurally sound.

Average Plasterboard dry lining cost in Leigh-on-sea

The average cost of Plasterboard dry lining is £850. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £977.5. The material costs are in most cases around £212.5

Average price per Plasterboard dry lining job in 2024

Avg. price low

Avg. price low
£638

Avg. price

Avg. price
£850

Avg. price high

Avg. price high
£978

£1100

£825

£550

£275

£0

Prices based on actual Plasterboard dry lining costs for Leigh-on-sea, as reported by local LeadsDoWork members.

Plasterboard dry lining installation cost in Leigh-on-sea 2024

Labour cost £595
Material cost £213
Waste removal £43
Time frame: 1-2 days

Plasterboard dry lining searches in November 2024

Plasterboard dry lining Projects in Leigh-on-sea in October 2024

518

Requests for quotations in Leigh-on-sea in October 2024

0

Requests for Plasterboard dry lining quotations in Leigh-on-sea in October 2024. 0% change from September 2024.

0

Requests for Plasterboard dry lining quotations in Essex in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Plasterboard dry lining searches in cities and towns near Leigh-on-sea October 2024

Leigh-on-sea

Leigh-on-Sea is a civil parish in Essex. It is a district of Southend-on-Sea, with its own town council, and is at present the only civil parish within the district. The town is set on the northern edge of the Thames estuary, being only several miles from the open waters of the North Sea and from the Kent coast. Featuring on the town's coastal area is a nature reserve at Two Tree Island and a centrally positioned beach next to Bell Wharf. Leigh's foreshore is mainly viewed as being an area with notable mud flats and creeks when the water is at low tide. Between the 1870s and the 1920s, Broadway, previously a residential street, was completely transformed into a commercial parade of shopfronts. In the 1930s, London Road and Leigh Road also ended up being acknowledged as commercial streets, holding outlets, workshops, commercial premises, and entertainment areas. Because of the supremacy of 24 Hr grocery stores and online shopping from the 1990s, a number of the town's independent firms went through redevelopment, with bars, cafés, eateries, galleries and gift shops replacing the majority of the traditional shops. Ongoing urban regeneration continues to appeal to new citizens to the town, along with wanting to accommodate for the rise in Southend's increased population. With a population of over 20000, Leigh was graded by Rightmove's 2016 Happy at Home Index as the happiest place to live in Great Britain, with attention being drawn to the strong community spirit, a sense of belonging, and fantastic access to sports and arts ventures. A range of community events are well established, such as the Leigh Regatta, occurring over one September weekend, the Leigh Folk Festival and the Leigh Art Trail. For all of your house upgrades, make certain to make use of trusted experts in Leigh-on-Sea to make certain of quality.

Looking for Plasterboard dry lining in Leigh-on-sea?

Get free quotes from local builders

Get free quotes

How it works

Tell us about your Plasterboard dry lining project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Builders in Leigh-on-sea

Get free, no-obligation quotes from 4 verified Builders working in Leigh-on-sea.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to dot and dab plasterboard?

How To Dot And Dab A Plasterboard

If you want a fast and simple way to achieve a smooth and sturdy wall which is decoration-ready, then dot and dab plasterboard is the way to go! It’s a relative simple process but can also be a bit challenging. Therefore, if you lack the necessary training or experience, hiring a professional would be a great step to protect your investment and guarantee the best results. Here, we’ll provide you with a deep insight into the plasterboard’s dot and dab procedures. Let’s have a look!

• At the thickness of the board with the adhesive, mark the ceiling and floor as well as the wall to indicate the centre of each board.

• Ensure the wall’s height is 15mm more than the plasterboard

• Make a mixture of the adhesive and achieve a thick consistency. Apply a consistent layer of the mixture around the wall’s perimeter, edge of the ceiling and any other openings with the use of a trowel.

• Select dabs that are about 250mm long and 50mm to 75mm wide and apply the adhesive in them. Make use of 3 vertical rows for individual boards. Also ensure to apply, at skirting level, a band of adhesive.

• Position the board’s reverse side against the dabs, and laying against the packers. Then make the board align with the ceiling and floor marks with the help of a straight edge.

• Raise the board till its tight against the ceiling with a board lifter. Once done, use the plasterboard to wedge the board into place before you remove the board lifter.

• Repeat the same process for the remaining parts of the room. Once completed, make sure the adhesive is set before you remove the boards.

How much plasterboard do I need?

How Much Plasterboard Do I Need?

Although many people especially contractors have a tough time estimating the number of drywall or plasterboard needed to complete a project, it’s a rather simple task if all factors are taken into consideration. If you’re able to follow the same procedures taken by professionals to count dry wall sheets, you’ll be in the right direction. Let’s have a look at the procedures to follow!

lTake Square Footage Measurement

• Measure the square footage of the area where the plasterboard will be fitted.

• Multiply the height by the width of each wall or ceiling area.

• Add all quantities to obtain a total square-foot amount.

lCalculate Drywall Sheets

• To calculate the number of drywall or plasterboard sheet is very simple once you’ve gotten the total square footage.

• To get started, simply divide the total square footage of area by 32 (that’s if you are using a 4 by 8 sheets) or you can also make use of 48 to make the division (only if you’re making use of the 4 by 12 sheets).

• The answer you get after the division will give you the full number of plasterboard sheets that’s required to complete the project.

We’d recommend you include an extra 10 to 15 percent of whatever you calculate to take care of the possible odd cuts and wastages. This implies that if your total area is 1600 square feet while incorporating 4 by 8 sheets, simply divide 1600 by 32 which equals 50 sheets, now take 10% of 50 which equals 5, then add back the 5 extra to the 50 sheets earlier calculated to get 55 sheets. If you wish to estimate the cost, simply multiply the number of sheets gotten by the price per sheet. Do not forget to include delivery charges and local taxes.

How much is plasterboard?

How Much Is Plasterboard?

Do you wish to install plasterboard in the nearest future? If yes, then you’d probably want to know the amount it’s going to cost. Here, we’ll give you a detailed plasterboarding prices breakdown to help you calculate an estimate for your project.

A plasterboarding project including the cost of both materials and labour with the use of a high quality panels is about £4 to £5 per panel. Therefore, if you wish to calculate on the basis of a standard room about 12x12ft would cost about £500 to £600. However, this price can fluctuate significantly depending on the professional as well as the quality of the materials you wish to incorporate in completing the project. We’d recommend that you hire the services of a professional with accreditation as he would provide you with a detailed quote with no hidden charges or costs. To give you a clearer idea, we’ve taken the time out to put together some estimated costs of employing the services of a seasoned professional plasterer to supply and plasterboard your home or office. Let’s take a look!

• A 6 x 12ft room with panels and plasterboard should have an average cost within the range of £250 to £400 and duration of one to two days.

• The individual cost of plasterboarding or drywalling a standard 12 x 12ft room should have an average cost within the range of £500 to £600 and duration of one to three days. These includes 60% for materials used (£330), 30% for tradespersons (£165) and the remaining 10% for waste removal (£55) to give a total cost of £550.

• A 12 x 24ft room with panels and plasterboard should have an average cost within the range of £1000 to £1200 and duration of three to six days.

How to plasterboard a brick wall?

How To Plasterboard A Brick Wall

Do you want to cover your brick wall with plasterboard? The key to success here is the preparation. You must ensure that brick wall is prepared well enough to receive the plasterboard. To get started, there’s the need to attach wood furring strips to the wall which serves as studs in a wood frame structure. This way, the plasterboard will be prevented from getting in touch with the brick. You can always hang pictures or any other forms of decoration in between the gap between the walls. Let’s have a look!

lAttach Furring Strips

• Get a 2 inch by 4 inch wood stud and apply a bead of construction adhesive.

• Using a masonry bit, drill a pilot hole through the wood stud’s base as well as the brick wall.

• Hit a 3 inch fluted nail through the hole using a sledgehammer

• Using a construction adhesive, bind a horizontal 2 inch by 3 inch stud to the upper edge of the wall.

• Using an adhesive, bind the length of a 2 inch by 3 inch stud on its wide side.

• Use a masonry drill to drill a hole on the wood stud and 1 1/2 inches into the brick wall.

• Hit a 3 inch fluted nail through the pilot hole.

lApply Plasterboard

• Hold a plasterboard sheet against the furring strips.

• Use plasterboard screw to hold the drywall sheets in place.

• Use fibreglass to cover the joints where the two plasterboard sheets meet.

• Use a thin layer of the joint compound on the tape. Once done, screw it using a 6 inch taping knife, then allow to dry overnight.

• Use a sandpaper to smooth the joint compound.

• Use a fresh coat of the joint compound to block the holes and joints. Once done, allow the compound to dry.

• Use a light sandpaper to smooth the final coat.

Plasterboarding a brick wall is a simple task but the preparation part must be done right to protect your investment. Therefore, we’d recommend you hire the services of a skilful professional, who can guarantee the best results especially if you lack enough training and experience to carry out a DIY project.

Placholder Image

Other Top Projects in Leigh-on-sea

Are you a builder in Leigh-on-sea?

We can help you get more Plasterboard dry lining work and boost your business.

Join today