Heating | Smart Thermostats
Attleborough - NR17
Enquiry from: Adam B
Start Date: Immediate
Looking for someone to replace a stoptap at my rental property. Please and can I have a price too thank you.
Managing the way your house is heated is one of the better ways to lessen costly energy expenses and leave you with more disposable income at the end of each month. Of course, 60% of your energy bill is from heating your house, so it's undoubtedly an excellent place to start.
With the proper controls you'll have the ability to keep your household at a comfortable temperature, while all at once not squandering further money on fuel. You'll also be able to keep your house co2 emissions down also.
The good thing is, heating control systems can be used with any boiler, no matter what type or even age. This signifies there's a saving to make should you just go out there and get it.
By putting in a heating control system you'll save between £70 and £150 yearly. On top of this there are a lot of CO2 emissions to be lowered too and you can slash between 310kg and 630kg every year.
Also take into account the temperature you have your thermostat set on. By just switching it down one degree, you can save as much as £75 yearly and won't feel a difference in temperature either.
The typical cost of Heating control system is £300. Costs differ based upon the materials and the tradesman selected. The upper price range can be as high as £345. The material costs are normally about £75
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£500
£375
£250
£125
£0
Labour cost | £210 | |
Material cost | £75 | |
Waste removal | £15 |
Requests for quotations in Norfolk in October 2024
Requests for Heating control system quotations in Norfolk in October 2024. 90% change from September 2024.
Requests for Heating control system quotations in East Of England in October 2024. 413% change from September 2024.
We recorded 23,244 requests for house improvement quotes in Norfolk. Of such price requests the volume of heating control systems was 38. Quotatis had been able to match up these clients with up to four ideal specialists who had been available for work in Norfolk back then.
Source: Numbers calculated based on the search volumes in major search enginesRequests for quotations in Great Yarmouth in October 2024
Requests for quotations in King's Lynn in October 2024
Requests for quotations in Attleborough in October 2024
Requests for quotations in Diss in October 2024
Requests for quotations in Hunstanton in October 2024
Attleborough - NR17
Enquiry from: Adam B
Start Date: Immediate
Looking for someone to replace a stoptap at my rental property. Please and can I have a price too thank you.
Fakenham - NR21
Enquiry from: Alex J
Start Date: Immediate
Good Evening I wondered if you would be able to provide a quote for installing a Nest e thermostat please? The current boiler is a Vogue Maxi Combi with a EPH RF Thermostat. Many thanks. ...
Norwich - NR3
Enquiry from: Melissa D
Start Date: Immediate
Hi I’m looking to have a smart thermostat installed. Not sure if best or hive is best option but need to be able to schedule thermostat temp ti be lower/higher at certain times of day and control fr...
Norwich - NR12
Enquiry from: Simon E
Start Date: Immediate
Hey, I have oil boiler and recently bought a hive for this and need it installed, I was wondering if your are able to do this? If so how much would it cost? Many thanks Simon
Wymondham - NR18
Enquiry from: Paul S
Start Date: Immediate
i recently moved to wymondham. i had a hive heating system in my previous home and would like to get something similar in my new home. the house has a dual zone combi boiler. is this something you cou...
Norwich - NR3
Enquiry from: Brandon W
Start Date: Immediate
Hive thermostat to be fitted for hot water and heating
King's Lynn - PE34
Enquiry from: Ron B
Start Date: Immediate
have just bought tado smart thermostat v3+wired version, just wondering how much to have installed only using for heating, have old controller already on wall. are you the property owner: owner of th...
North Walsham - NR28
Enquiry from: Peter W
Start Date: Immediate
replace three way valve in central heating system are you the property owner: owner of the property age of boiler: 10+ years is your boiler: gas house type: detached how many bedrooms do you have: 3-...
Norwich - NR2
Enquiry from: Rahuraj S
Start Date: Immediate
honeywell display unit not working are you the property owner: owner of the property age of boiler: 0-5 years is your boiler: gas house type: terrace how many bedrooms do you have: 1-2 bedrooms pleas...
North Walsham - NR28
Enquiry from: KEVIN D
Start Date: Immediate
our heating is coming on and off, if at all. not sure if it is the pump or control unit but, need it fixed asap. are you the property owner: relative of owner age of boiler: 6-10 years is your boiler...
Norwich - NR16
Enquiry from: Martin S
Start Date: Immediate
very limited hot water, on closer inspection i can't keep the pressure in the system and there seems to be an issue with the pressure relief valve? are you the property owner: owner of the property ag...
Thetford - IP25
Enquiry from: Andrew K
Start Date: Immediate
central heating to work in my annexe are you the property owner: tenant (with permission) age of boiler: 10+ years is your boiler: oil house type: semi detached how many bedrooms do you have: 1-2 bed...
Thetford - IP25
Enquiry from: Tomas J
Start Date: Immediate
installation of nest thermostat are you the property owner: owner of the property age of boiler: 0-5 years is your boiler: gas house type: semi detached how many bedrooms do you have: 3-4 bedrooms pl...
Norwich - NR8
Enquiry from: Richard P
Start Date: Immediate
remove existing programmer and room thermostat. to supply and fit new nest thermostat n*** generation silver room thermostat, nest stand and electrical supplies. drain down the system. to remove the ...
Norwich - NR8
Enquiry from: HUGH S
Start Date: Immediate
hive active heating and hot water
Norwich - NR6
Enquiry from: Merrick O
Start Date: Immediate
give installation to a combi boiler. new build are you the property owner: owner of the property age of boiler: 0-5 years is your boiler: gas house type: semi detached
King's Lynn - PE30
Enquiry from: Bob S
Start Date: Immediate
Supply and install Hive heating system
Norwich - NR9
Enquiry from: Darren E
Start Date: Immediate
2 zone heating on new build boiler are you the property owner: owner of the property age of boiler: 0-5 years is your boiler: gas house type: detached how many bedrooms do you have: 3-4 bedrooms pleas...
Great Yarmouth - NR29
Enquiry from: Mr L
Start Date: Immediate
3 port (y Pan) valve replacement
Swaffham - PE37
Enquiry from: June N
Start Date: Immediate
radiators warm, hot, cold. bled radiators and replaced hw zone valve. pipe to cylinder very hot and control panel didn’t work. hw always on when central heating working. still the same after rep...
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Heating Engineers working in Norfolk.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
The Hive thermostat stand is relatively easy to install, however if you lack the necessary training or experience, this is a task you might want to leave to a professional to guarantee the best result while also saving you money and time. This guide will give you a good insight into the Hive thermostat installation process.
The installation of a Hive thermostat does require it to be connected to your home boiler. For this reason we always recommend you get a professional to install it. However once install the Hive Smart Thermostat is very easy to operate and move the controller around your home. To get started, you can follow these steps:
• Press the lever at the lower side of the thermostat and pull away from the front to detach the back plate of your device.
• Once done, simply hang the thermostat on the stand back plate and ensure it holds firmly in place
When it comes to Hive thermostat installation, you might also want to consider the positioning of the device in such a way to heat your home even more efficiently as its designed to be very sensitive to temperature. To identify the best spot for your Hive thermostat, let’s take a look at some of the dos and don’ts.
A Few Dos:
• Do maintain the position of your Hive Thermostat to keep a stable connection with the receive and Hive Hub.
• Do ensure that the position chosen is the centre of your home or a frequently used room.
• Do place the thermostat about 1 to 1.5 metres from floor.
• Do ensure that your thermostat is in a close proximity with the hub and receiver for a better functionality.
A Few Don’ts:
• Don’t place your Hive thermostat stand close to radiators, direct sunlight or other heat sources,
• Don’t position your device near or at places that can expoerience a sudden change in temperature such as the front or back door.
• Don’t leave your thermostat too close to curtains or ornaments.
If you’re interested in deriving maximum benefits from your central heating system while also being a tech-enthusiast, a smart thermostat is just the perfect option as it allows you to control both your boiler and heating system via your mobile device. It also offers a plethora of features which enables you to heat your home more efficiently while also cutting your energy bills. Here, we’ll be taking a deeper look at the Tado smart thermostat (a user friendly smart thermostat with multiple impressive features such as a great design, self learning and LED interface).
A Tado smart thermostat is a relatively small piece of kit which is perfect for tech-lovers looking to get a first experience of the smart thermostats’ world. Although the appliance might feature just a basic design with a bit less advanced features in comparison with other thermostats like Hive, Nest and more, it however, still comes with some fantastic features which you can’t afford to miss out on. These includes geofencing, Smartphone or tablet control as well as heat scheduling. As you would have expected with any good smart thermostat, the ability to remotely control your heating is a top priority for several smart thermostats’ owners and Tado offers you this and more. Therefore, no more worries during the Winter months and wishing your home should be warm and perfect for your return. Aside this, a Tado smart thermostat also goes a long way to ensure efficient energy use and as a result, reducing the money paid on energy bills.
Overall, Tado is a nicely designed smart thermostat which is relatively easy to use and a perfect option for homeowners interested in having a taste of the world of smart thermostats or looking to replace their existing device.
If you’re building a connected home, a smart thermostat allows you to change the temperature in your home. And not only do several smart thermostats come with touch screens and a user friendly interface, but they’re also compatible with Amazon Alexa, Google Assistant and other voice controlled personal assistants. So how does a smart thermostat work? Let’s have a look!
Generally, smart thermostats are connected to the home’s Heating and/or Air Con system via C wire (common wire). Homes that lacks a C wire (especially older homes) will have to install one first before getting a smart thermostat. The C wire is a crucial element in the installation process as it works mainly to wire your smart thermostats into the Boiler system without tampering with the wiring for the other appliances in the house.
The smart thermostats comes with some special temperature setting which you can access by connecting them to your home’s WiFi. These include:
• Mobile Control
Most smart thermostats are specially designed to enable users to control the temperature of their home from the comfort of their couch or car via their unique mobile apps. This feature is just perfect if you particularly like getting the perfect temperature in your home without having to get out of bed.
• Humidity Controls
Although, the humidity of your home can not really be adjusted with a smart thermostat but you can always stay on top of it by monitoring it or setting an alarm on your phone to go off when the humidity changes.
• Geofencing Feature
With a smart thermostat, you can choose the particular times of the day you want it in action. This feature enables you to go on impromptu travels without having to worry about your energy bills - some smart thermostats come with the geotracking feature which determines when you’ve left the house and adjusts the temperature of the home accordingly with your energy usage in mind.
Smart controls such as Hive are the next generation technology with more and more people now converting their houses into smart homes to control multiple devices in the homes remotely. Smart technology can be incorporated with several household devices such as security, lighting, entertainment and more. But what if there’s an oil boiler installed in your home, can you still connect your Hive with the your heating? Well, simply read on to find out.
The answer to this question is yes, most oil boilers are compatible with Hive and can substitute for either an existing conventional programmer or thermostat. The smart technology works to help derive more benefits from your heating system and they usually come with apps which can be used to control your home’s heating from anywhere with just your mobile device. Hive, however, cannot work to replace the functions of smart oil boiler heating controls to modulate your heating as they only work on an on or off basis. To make use of the modulating technology in an oil boiler, the cost of manufacture would be considerably higher while offering little advantage in efficiency for the home or property owner. Ultimately, this implies that you can’t incorporate smart technology to control the output in a similar way as a gas boiler, but there are still some ways to utilize smart technology with your oil boiler in such a way to boost your efficiency and lessen the energy bills.
Do you want to use your Hive with your home’s oil boiler? We’d advise you get in touch with an OFTEC qualified engineer if you wish to install Hive Active Heating on your oil boiler, as British Gas engineer do not offer this service.
We can help you get more Heating control system work and boost your business.
Join today