Smart Thermostat in Downpatrick

Discover Smart Thermostat Prices in Downpatrick

Home > Heating Projects > Heating control system > Downpatrick

Smart Thermostat in Downpatrick

Controlling the way your home is heated is amongst the better ways to lessen pricey energy expenses and leave you with more disposable income at the end of each and every month. All things considered, 60% of your energy bill is from heating your property, so it's definitely a good place to begin.

With the right controls you'll be able to keep your home at a comfy temperature, while all at once not throwing away more money on fuel. You'll also be able to keep your property carbon dioxide emissions down too.

Fortunately, home heating control systems may be used with any central heating boiler, no matter what design or age. This suggests there's a saving to make should you go out there and get it.

By installing a heating control system it can save you in between £70 and £150 each and every year. Moreover there are a lot of CO2 emissions to be reduced also and you'll cut between 310kg and 630kg each year.

Also consider the temperature you have your thermostat fixed on. By only switching it down a single degree, you can save approximately £75 a year and won't feel a difference in temperature either.

Average Heating control system cost in Downpatrick

The typical cost of Heating control system is £300. Costs differ based upon the materials and the tradesman selected. The upper price range can be as high as £345. The material costs are normally about £75

Average price per Heating control system job in 2025

Avg. price low

Avg. price low
£225

Avg. price

Avg. price
£300

Avg. price high

Avg. price high
£345

£500

£375

£250

£125

£0

Prices based on actual Heating control system costs for Downpatrick, as reported by local LeadsDoWork members.

Heating control system installation cost in Downpatrick 2025

Labour cost £210
Material cost £75
Waste removal £15
Time frame: 1 day

Heating control system searches in January 2025

Heating control system Projects in Downpatrick in December 2024

257

Requests for quotations in Downpatrick in December 2024

0

Requests for Heating control system quotations in Downpatrick in December 2024. 0% change from November 2024.

0

Requests for Heating control system quotations in County Down in December 2024. 0% change from November 2024.

We recorded 257 requests for house improvement quotations in Downpatrick. Of such quotation requests the number of heating control systems was 0. Quotatis had the ability to match these clients with as many as four suitable experts that were available for work within Downpatrick during that time.

Source: Numbers calculated based on the search volumes in major search engines

Heating control system searches in cities and towns near Downpatrick December 2024

Downpatrick

Downpatrick (from Irish: Dún Pádraig, indicating "Patrick's fortress") [4] is a village about 33 kilometres (21 mi) southern of Belfast in County Down, Northern Ireland. It has actually been a vital site considering that ancient times. Its cathedral is said to be the tomb of Saint Patrick. Today, it is the county town of Down as well as the joint headquarters of Newry, Mourne and Down District Council. Downpatrick had a population of 10,822 according to the 2011 Census. As the biggest town in the Lecale location, Downpatrick is a commercial, leisure and management center for the region and also functions as a center for the neighboring communities as well as towns. Within a 30 minutes drive from Belfast, the location functions as a traveler community for a a great deal of people. The community has a number of key as well as post-primary schools enlightening students from around the east Down location. Downpatrick is likewise well-known since its background of St Patrick, even though the community had been called after him, it is believed during the 5th century he had actually resided in Downpatrick as well as is presently buried in Down Cathedral. Downpatrick is qualified by the rolling drumlins that are a function of the Lecale location as well as a heritage of glaciation during the Pleistocene, the Down drumlins themselves are underlaid by Ordovician and Silurian shales as well as grits. Its floor exists within the marshland surrounding the north eastern of the town, recorded as being 1.3 feet (0.40 m) listed below sea level. Downpatrick is roughly 22 miles (35 kilometres) from Belfast as well as has a routine bus service to the city.

Looking for Heating control system in Downpatrick?

Get free quotes from local heating engineers

Get free quotes

Similar Customer Enquiries for Heating control system in Downpatrick

09 Oct

Heating | Smart Thermostats

Downpatrick - BT30

Enquiry from: Ann O

Start Date: Immediate

Supply and fit nest heating system

Post a similar request >

19 Sep

Heating | Smart Thermostats

Downpatrick - BT30

Enquiry from: Terence Y

Start Date: Immediate

Are you the property owner: Tenant (with permission) Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Would you consider an easy payment plan: Yes Do you ha...

Post a similar request >

29 Feb

Heating | Smart Thermostats

Newtownards - BT22

Enquiry from: Brian I

Start Date: Immediate

Smart thermostat installed

Post a similar request >

10 Oct

Heating | Smart Thermostats

Newtownards - BT22

Enquiry from: Donna T

Start Date: Immediate

Smart thermostat installed

Post a similar request >

06 Oct

Heating | Smart Thermostats

Newtownards - BT22

Enquiry from: Andrew R

Start Date: 1 to 3 months

Great, what do you need done? Heating Control System I need underfloor heating serviced. Not working well. Are you the property owner: Owner of the property Age of boiler: 0-5 Years Is your boiler: Oi...

Post a similar request >

30 Jan

Heating | Smart Thermostats

Newtownards - BT22

Enquiry from: T

Start Date: Immediate

price for supply and fit Hive/Nest thermostat no thermostat in house at present. Also hot water tank problem , only heating bout half a tank and melting tank jacket. Would welcome free estimates.

Post a similar request >

09 Jun

Heating | Smart Thermostats

Newcastle - BT33

Enquiry from: Marco P

Start Date: 1 to 3 months

Owner of the property Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Would you consider an easy payment plan: Yes Do you have a good credit history: Yes ...

Post a similar request >

19 Mar

Heating | Smart Thermostats

Newtownards - BT22

Enquiry from: David B

Start Date: Immediate

Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 25-50 years Other Forms: 336, 59 A...

Post a similar request >

06 Feb

Heating | Smart Thermostats

Newtownards - BT22

Enquiry from: Kirk P

Start Date: Immediate

Home Owner Are you the property owner: Owner of the property Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Time scale: 1-3 months Other Forms: 336 Agre...

Post a similar request >

Local & reliable heating engineers near me

Tell us about your heating control system project

Answer a few quick questions, so we can match you with local heating engineers who can help.

Find up to 4 heating engineers in Downpatrick

Get free, no-obligation local heating control system quotes from 4 verified heating engineers working in Downpatrick.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

how to install nest thermostat?

Installing your Nest thermostat may not be as easy as screwing a light bulb, but we can also assure you that it isn’t very difficult either. However, if you lack the needed training or experience to pull it off, we’d recommend you hire the services of a professional in order to save yourself some time and money. This guide will give you some quick and easy steps to follow and ensure you make no errors during the installation process.

Once installed removing the Nest Thermostat can be done. To get started, you’ll need just a Philips head screwdriver which Nest has thoughtfully provided with the device.

• Turn off the Nest Thermostat by switching the circuit breaker to the off position.

• Label or mark your old thermostat’s wires. However, if you notice your thermostat is tagged 120v or 240v, or possesses thick wires, do not connect the wires to the Nest as you have a high voltage system.

• Uninstall the old thermostat by locating detaching the wires coming out from the wall into the thermostat. Once done, simply unscrew the device from the wall

• Mark the spot of your thermostat. Do this by threading wires through the Nest base plate’s centre incorporate the tiny bubble level. Once done, you can then use a pencil to mark te two screw holes.

• Attach the trim plate. If you wish to cover the screw holes, simply install the trim plate in the Nest box’s bottom to the base plate.

• Using the screws and screwdriver, attach the Nest base to the wall.

• Connect the wires to the Nest by putting the labelled wires in the Nest’s corresponding ports.

• Put the Nest display by lining up the connector on the display’s back.

• Turn on the power by switching the circuit breaker to the on position

• Connect your Nest thermostat to the WiFi network.

• Follow the on-screen guide and set the temperature.

• Use your smartphone or tablet to download the Nest thermostat’s mobile app to monitor and control your device remotely.

how does the smart thermostat work?

If you’re building a connected home, a smart thermostat allows you to change the temperature in your home. And not only do several smart thermostats come with touch screens and a user friendly interface, but they’re also compatible with Amazon Alexa, Google Assistant and other voice controlled personal assistants. So how does a smart thermostat work? Let’s have a look!

Generally, smart thermostats are connected to the home’s Heating and/or Air Con system via C wire (common wire). Homes that lacks a C wire (especially older homes) will have to install one first before getting a smart thermostat. The C wire is a crucial element in the installation process as it works mainly to wire your smart thermostats into the Boiler system without tampering with the wiring for the other appliances in the house.

The smart thermostats comes with some special temperature setting which you can access by connecting them to your home’s WiFi. These include:

• Mobile Control

Most smart thermostats are specially designed to enable users to control the temperature of their home from the comfort of their couch or car via their unique mobile apps. This feature is just perfect if you particularly like getting the perfect temperature in your home without having to get out of bed.

• Humidity Controls

Although, the humidity of your home can not really be adjusted with a smart thermostat but you can always stay on top of it by monitoring it or setting an alarm on your phone to go off when the humidity changes.

• Geofencing Feature

With a smart thermostat, you can choose the particular times of the day you want it in action. This feature enables you to go on impromptu travels without having to worry about your energy bills - some smart thermostats come with the geotracking feature which determines when you’ve left the house and adjusts the temperature of the home accordingly with your energy usage in mind.

how to install hive thermostat?

The Hive thermostat stand is relatively easy to install, however if you lack the necessary training or experience, this is a task you might want to leave to a professional to guarantee the best result while also saving you money and time. This guide will give you a good insight into the Hive thermostat installation process.

The installation of a Hive thermostat does require it to be connected to your home boiler. For this reason we always recommend you get a professional to install it. However once install the Hive Smart Thermostat is very easy to operate and move the controller around your home. To get started, you can follow these steps:

• Press the lever at the lower side of the thermostat and pull away from the front to detach the back plate of your device.

• Once done, simply hang the thermostat on the stand back plate and ensure it holds firmly in place

When it comes to Hive thermostat installation, you might also want to consider the positioning of the device in such a way to heat your home even more efficiently as its designed to be very sensitive to temperature. To identify the best spot for your Hive thermostat, let’s take a look at some of the dos and don’ts.

A Few Dos:

• Do maintain the position of your Hive Thermostat to keep a stable connection with the receive and Hive Hub.

• Do ensure that the position chosen is the centre of your home or a frequently used room.

• Do place the thermostat about 1 to 1.5 metres from floor.

• Do ensure that your thermostat is in a close proximity with the hub and receiver for a better functionality.

A Few Don’ts:

• Don’t place your Hive thermostat stand close to radiators, direct sunlight or other heat sources,

• Don’t position your device near or at places that can expoerience a sudden change in temperature such as the front or back door.

• Don’t leave your thermostat too close to curtains or ornaments.

can you use hive with an oil boiler?

Smart controls such as Hive are the next generation technology with more and more people now converting their houses into smart homes to control multiple devices in the homes remotely. Smart technology can be incorporated with several household devices such as security, lighting, entertainment and more. But what if there’s an oil boiler installed in your home, can you still connect your Hive with the your heating? Well, simply read on to find out.

The answer to this question is yes, most oil boilers are compatible with Hive and can substitute for either an existing conventional programmer or thermostat. The smart technology works to help derive more benefits from your heating system and they usually come with apps which can be used to control your home’s heating from anywhere with just your mobile device. Hive, however, cannot work to replace the functions of smart oil boiler heating controls to modulate your heating as they only work on an on or off basis. To make use of the modulating technology in an oil boiler, the cost of manufacture would be considerably higher while offering little advantage in efficiency for the home or property owner. Ultimately, this implies that you can’t incorporate smart technology to control the output in a similar way as a gas boiler, but there are still some ways to utilize smart technology with your oil boiler in such a way to boost your efficiency and lessen the energy bills.

Do you want to use your Hive with your home’s oil boiler? We’d advise you get in touch with an OFTEC qualified engineer if you wish to install Hive Active Heating on your oil boiler, as British Gas engineer do not offer this service.

Placholder Image

Other Top Projects in Downpatrick

Customer Reviews

Overall rating:


Downpatrick Heating control system installers are rated 0 out of 5 based on 0 reviews of 0 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Heating control system projects that have been connected with Heating control system pros to help them. All Heating control system contractors All Downpatrick Heating control system contractors

Are you a heating engineer in Downpatrick?

We can help you get more heating control system work with our qualified job leads and boost your business.

Join today